POLAR SPAS MUST BE WIRED IN ACCORDANCE WITH ALL APPLICABLE LOCAL ELECTRICAL CODES. ALL ELECTRICAL WORK SHOULD BE DONE BY AN EXPERIENCED, LICENSED ELECTRICIAN. BELOW IS THE INFORMATION YOU WILL NEED TO GIVE THE ELECTRICIAN:
1. WIRE #6-3 WIRE WITH #6 GROUND
2. BREAKER 220V 40 AMP (OR 50 AMP WITH 2 OR MORE PUMP SYSTEMS)
3. BRING WIRE TO CENTER OF HOT TUB AND ADD 8' SLACK.
4. PUT 1" BOX CONNECTOR ON THE HOT TUB END OF THE WIRE
Electrical Requirements
